BCM-C110801 - Power supply sensor. General Failure Information. General electrical failure
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
12 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (19)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2012
- Volvo V60 (2011–)2013–2014Alle Motoren außer: D82PHEV
- Volvo V60 (2011–)2015Alle Motoren außer: D82PHEV, D87PHEV
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
- Volvo XC90 (2003–)2005–2006Nur Motor: B8444S
- Volvo XC90 (2003–)2007–2010Nur Motor: B6324S, B8444S
- Volvo XC90 (2003–)2011Nur Motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012Nur Motor: B6324S5
- Volvo XC90 (2003–)2013–2014Alle Motoren außer: B5254T9
Was bedeutet der Fehlercode?
The brake control module (BCM) supplies the brake pressure sensors and the brake pedal position sensor from a common voltage inside the module. If the voltage to the sensors is wrong, the code is set, which switches off the stability systems and brake assistance. The code only applies to cars with DSTC and can only be confirmed once the test has started.
Mögliche Ursachen
- Wire shorted to ground
- Wire shorted to supply voltage
- Damaged sensor
- Damaged brake control module, which is uncommon
Was Sie tun können
- 1Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 2Check the connectors at the brake control module and the sensors for contact resistance and oxidation
- 3Check the wiring between the module and the sensors for open circuits, chafing and shorts
- 4Road test the car and then read the code without switching the ignition off in between
- 5The brake system is safety-critical, so have a workshop carry out any work on the module and the sensors
Symptome, die Sie bemerken können3
- General warning lamp on
- Traction control, stability function and anti-skid function do not work
- Traction control warning lamp lit
Was der Fehler beeinflussen kann2
- Stability control, traction control and brake assistance are disabled
- Dynamic stability control (AYC) is disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.