VOLVO
BCM-C110811 - Pedal Sensor(s) Supply Voltage. General Electrical Failures. Circuit short to ground
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellV60 (2011–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The brake control module (BCM) has detected that the voltage to the brake pressure and pedal position sensors is wrong, with a wire shorted to ground as the most likely cause. The stability functions are then switched off. The fault can only be detected once the test has started and the conditions are met.
Mögliche Ursachen
- Wire shorted to ground
- Wire shorted to supply voltage
Was Sie tun können
- 1Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 2Where possible, check that the relevant functions work using the switches, controls and a road test
- 3Check the wiring to the sensors for chafing and places where it could have touched ground
- 4Read the codes with diagnostic equipment and correct the short before replacing any component
- 5The brake system is safety-critical, so avoid driving with reduced braking function and have a workshop repair the fault
Symptome, die Sie bemerken können3
- Traction control and anti-skid warning lamps show a fault
- Traction control does not work
- Stability function does not work
Was der Fehler beeinflussen kann2
- Traction control and stability control are switched off
- Dynamic stability control (AYC) is disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.