Was bedeutet der Fehlercode BCM-C110964?

Diagnose und Fehlercodedefinition für BCM-C110964 (Volvo C30 (2007–2013), Volvo C70 (2006–2013), Volvo C70 (2006–2013)). Steuergerätereparatur bei OBD Tuning.

VOLVO

BCM-C110964 - Vehicle Dynamics Control Switch. Algorithm Based Failures. Signal plausibility failure

System

Bremssteuergerät (BCM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

6 Modelle

C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013)

Modelle nach Baujahr und Motor anzeigen (7)

Was bedeutet der Fehlercode?

The brake control module (BCM) has registered that the signal to switch off the DSTC/ESC stability system has been active for too long. The system always starts with stability control switched on and can only be switched off manually with the thumb wheel on the left steering stalk. The fault most often means a control has stuck or communication has been disturbed.

Mögliche Ursachen

One or more controls on the left steering stalk have stuck in the activated position
Interference or brief interruptions on the data network (CAN)
Fault in the central electronic module (CEM), which sends the signal

Was Sie tun können

1Check that the control on the left steering stalk moves freely and is not stuck, and that nothing is pressing on it
2Check the fuses for the stability system
3Clear the code and check that it does not return after the control has been tested
4If the fault remains, have a workshop read the codes in the central electronic module and check the data network with diagnostic equipment
5The stability and brake systems are safety-critical, so have a workshop carry out any work on the module

Symptome, die Sie bemerken können1

No clear symptoms for the driver

Was der Fehler beeinflussen kann1

The DSTC/ESC stability system cannot be switched off during the current drive

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.