VOLVO
BCM-C111486 - Inclination sensor. Bus/message error. Invalid signal
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellXC90 (2003–)
Was bedeutet der Fehlercode?
One of the sensors in the AYC sensor has an incorrect offset value, meaning the correction that compensates for the sensor's own deviation. This most often means the sensor is fitted incorrectly or its bracket is damaged. The code only applies to cars with DSTC.
Mögliche Ursachen
- AYC sensor incorrectly fitted
- Loose AYC sensor
- Bent bracket for the AYC sensor
- Internal fault in the AYC sensor
Was Sie tun können
- 1Check that the AYC sensor is firmly secured and correctly fitted to the bracket under the front passenger seat
- 2Make sure the bracket is not bent or otherwise damaged
- 3Correct any faults in the fitting and clear the code
- 4The brake and stability systems are safety-critical, so have a workshop carry out any work on the sensor and the module
Symptome, die Sie bemerken können4
- General warning lamp on
- Traction control does not work
- Stability function does not work
- Anti-skid function does not work
Was der Fehler beeinflussen kann2
- Traction control, stability control and dynamic stability control (AYC) are disabled
- Roll stability control (RSC) is disabled on cars that have it
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.