Was bedeutet der Fehlercode BCM-C111495?

Diagnose und Fehlercodedefinition für BCM-C111495 (Volvo XC90 (2003–), Volvo XC90 (2003–), Volvo XC90 (2003–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

BCM-C111495 - Inclination sensor. Component malfunction. Incorrect assembly

System

Bremssteuergerät (BCM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

1 Modell

XC90 (2003–)

Modelle nach Baujahr und Motor anzeigen (5)

Was bedeutet der Fehlercode?

There are two versions of the AYC sensor, one for two-wheel-drive cars and one for four-wheel-drive cars. The code means the brake control module has found that the wrong version of sensor is fitted to the car. The cause is the fitting or a replacement, not an electrical fault in the sensor. The code only applies to cars with DSTC.

Mögliche Ursachen

Wrong AYC sensor fitted

Was Sie tun können

1Check whether the AYC sensor has been replaced recently, as the wrong sensor is usually fitted during a replacement
2Check that the sensor matches the car's drivetrain, that is, two-wheel drive or four-wheel drive
3Fit the correct sensor for the car's type, which should be done by a workshop
4Verify afterwards by reading the code after a road test
5The brake and stability systems are safety-critical, so have a workshop carry out the replacement

Symptome, die Sie bemerken können4

General warning lamp on
Traction control does not work
Stability function does not work
Anti-skid function does not work

Was der Fehler beeinflussen kann1

Traction control, stability control and dynamic stability control (AYC) are disabled

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.