VOLVO
BCM-C113328 - Left Front Brake Pressure Sensor. General Signal Failures. Signal bias level out of range / zero adjustment failure
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellV60 (2011–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The brake pressure sensor at the front left wheel sends two output signals to the brake control module: one for pressure and one combined signal for pressure and temperature in the brake fluid. The code is set when one of the sensor's output signals is outside the permitted range, so the pressure in that circuit cannot be trusted.
Mögliche Ursachen
- Damaged front left brake pressure sensor
- Internal fault in the brake control module
Was Sie tun können
- 1With diagnostic equipment establish whether the sensor or the brake control module is at fault, and replace the brake control module if the fault remains
- 2After replacing the brake control module, the workshop must recalibrate the internal sensors, as the acceleration sensor (IMU) also needs it
- 3Switch the ignition on and choose to continue the calibration when the system asks
- 4The brake system is safety-critical, so have a workshop carry out all work on the sensor and the module
Symptome, die Sie bemerken können4
- Hill descent assist does not work
- Front monitoring and adaptive cruise control do not work
- Hill start assist does not work
- Traction control does not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.