VOLVO
BCM-C113349 - Left Front Brake Pressure Sensor. System Internal Failures. Internal electronic failure
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellV60 (2011–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The brake control module (BCM) has registered that one of the output signals from the brake pressure sensor at the front left wheel is outside the permitted range. It is an internal electrical fault, and the code indicates that either the sensor or the brake control module is damaged.
Mögliche Ursachen
- Damaged front left brake pressure sensor
- Internal fault in the brake control module
Was Sie tun können
- 1Switch the ignition off and have a workshop with diagnostic equipment establish which part is at fault
- 2Replace the brake control module if the fault remains, bearing in mind that the new one must be calibrated
- 3After the replacement the internal sensors must be calibrated, as the acceleration sensor (IMU) also needs it
- 4Switch the ignition on again and choose to continue the calibration when the system asks
- 5The brake system is safety-critical, so have a workshop carry out all work on the sensor and the module
Symptome, die Sie bemerken können4
- Hill descent assist does not work
- Front monitoring and adaptive cruise control do not work
- Hill start assist does not work
- Traction control does not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.