Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    BCM-U002888
    VOLVO

    BCM-U002888 - Vehicle Communication Bus A. Bus Signal / Message Failures. Bus off

    System

    Bremssteuergerät (BCM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    6 Modelle

    S60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), XC60 (2009–)

    Modelle nach Baujahr und Motor anzeigen (6)
    • Volvo S60 (2011–)2011–2015
    • Volvo V40 (2013–)2013–2015
    • Volvo V40 Cross Country (2013–)2013–2015
    • Volvo V60 (2011–)2011–2015
    • Volvo V60 Cross Country (2015–)2015
    • Volvo XC60 (2009–)2013–2015

    Was bedeutet der Fehlercode?

    The brake control module (BCM) has lost contact with the airbag system's main unit (SRS) on the local sensor network and has therefore shut down its communication on that network. The fault means incorrect messages are being sent or received between the BCM and the SRS. The cause is most often a short in the wiring, and the code points to starting the troubleshooting in the module that transmits.

    Mögliche Ursachen

    • Short circuit to battery supply
    • Short circuit to ground
    • Fault in the module transmitting incorrect messages

    Was Sie tun können

    1. 1Check the wiring on the local sensor network for shorts to supply voltage and to ground
    2. 2Check the communication between the airbag system's main unit, the crash speed module and the passenger weight sensor where fitted
    3. 3If no fault is found in the wiring, have a workshop troubleshoot the crash speed module with diagnostic equipment
    4. 4The airbag and brake systems are safety-critical, so do not work on them yourself and have a workshop carry out all work on the wiring and the modules

    Symptome, die Sie bemerken können5

    • Traction control warning lamp lit
    • Stability function does not work
    • Traction control does not work
    • Anti-skid function does not work
    • Adaptive cruise control and collision and brake support do not work

    Was der Fehler beeinflussen kann1

    • The brake control module shuts down communication on the local sensor network

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.