VOLVO
BCM-U010400 - Lost Communication With Forward Sensing Module (FSM). General Failure Information. No sub type information
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
Was bedeutet der Fehlercode?
The brake control module (BCM) is not receiving signals from the front monitoring module (FSM), or the communication is disturbed. Functions such as adaptive cruise control, collision warning with brake support and front monitoring may then not work. The fault most often comes from interference or temporary breaks rather than from the brake control module.
Mögliche Ursachen
- Interference or intermittent breaks on the CAN network
- Fault in the front monitoring module (FSM)
Was Sie tun können
- 1Read codes in the central electronic module and any other affected modules, and correct them first
- 2If no codes are stored, check the CAN network wiring and the connectors at the front monitoring module for breaks and contact resistance
- 3Check that the wiring is not routed close to sources of interference, such as mobile phones
- 4Clear the code only once the cause has been corrected, and check that it does not return after a road test
- 5The collision and brake systems are safety-critical, so have a workshop carry out any work on the wiring and the modules
Symptome, die Sie bemerken können5
- Adaptive cruise control does not work
- Collision warning and brake support do not work
- Front monitoring and active safety do not work
- Cruise control will not engage
- The brake pedal needs more force than normal
Was der Fehler beeinflussen kann3
- Stability control is disabled
- Traction control is disabled
- Dynamic stability control (AYC) is disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.