VOLVO
BCM-U023500 - Lost Communication With Closing Velocity Module. General Failure Information. General electrical failure
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
11 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (14)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2008–2015
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2012
- Volvo V60 (2011–)2013–2014Alle Motoren außer: D82PHEV
- Volvo V60 (2011–)2015Alle Motoren außer: D82PHEV, D87PHEV
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Was bedeutet der Fehlercode?
The brake control module (BCM) receives no communication from the crash speed module (CVM). The fault may come from interference or intermittent breaks on the CAN network, or from a break or loose contact in the wiring between the BCM and the CVM. The front monitoring function may then not work.
Mögliche Ursachen
- Interference or intermittent breaks on the CAN network
- Break or loose contact in the wiring between the brake control module and the crash speed module
- Fault in the module that sends the signal
Was Sie tun können
- 1Read codes in the central electronic module and other affected modules, and correct them first
- 2If no codes are stored, check the wiring and connectors on the CAN network between the BCM and the crash speed module
- 3Check that the wiring is not routed close to sources of interference, such as mobile phones
- 4Do not replace the brake control module for this code, as the fault does not lie in it
- 5The collision and brake systems are safety-critical, so have a workshop carry out all work on the wiring and the modules
Symptome, die Sie bemerken können1
- Front monitoring and active safety do not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.