VOLVO
BCM-U040200 - Invalid Data Received from TCM. General Failure Information. No sub type information
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (5)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
Was bedeutet der Fehlercode?
The brake control module (BCM) receives no information from the transmission control module (TCM) on the CAN network, or the communication is disturbed. The stability functions then cannot get data about the gearbox. The fault most often comes from interference or intermittent breaks on the network rather than from the brake module itself.
Mögliche Ursachen
- Interference or intermittent breaks on the CAN network
- Fault in the transmission control module (TCM)
Was Sie tun können
- 1Read codes in the central electronic module and any other affected modules first, and correct them before this code is cleared
- 2If no codes are stored, check the wiring on the CAN network for breaks, chafing and contact resistance
- 3Check that the wiring is not routed close to sources of interference, such as mobile phones
- 4Clear the code only once the cause has been corrected, and check that it does not return after a road test
- 5The brake system is safety-critical, so have a workshop carry out any work on the wiring and the modules
Symptome, die Sie bemerken können3
- Traction control warning lamp lit
- Stability function does not work
- Anti-skid function does not work
Was der Fehler beeinflussen kann3
- Stability control is disabled
- Traction control is disabled
- Dynamic stability control (AYC) is disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.