VOLVO
BCM-U042829 - Invalid data received from steering angle sensor module (SAS). General signal error. Signal invalid
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellXC90 (2003–)
Was bedeutet der Fehlercode?
The steering angle sensor control module (SAS) sends data to the brake control module (BCM) in small packets, and each packet carries an ID number. The code is set when the BCM receives an ID number it does not expect.
Mögliche Ursachen
- Interference or intermittent breaks on the CAN network
- Internal fault in the steering angle sensor control module (SAS)
Was Sie tun können
- 1If the code was set during programming of the brake control module, clear it and check that it does not return
- 2Read codes in the central electronic module and troubleshoot any codes there first
- 3Check the connectors at the brake control module and the steering angle sensor for contact resistance and oxidation, and keep the wiring away from sources of interference such as mobile phones
- 4If no fault is found, have a workshop replace the steering angle sensor
- 5The brake and stability systems are safety-critical, so have a workshop carry out any work on the modules
Symptome, die Sie bemerken können4
- General warning lamp on
- Anti-skid function does not work
- Stability function does not work
- Traction control does not work
Was der Fehler beeinflussen kann3
- Traction control is disabled
- Stability control is disabled
- Dynamic stability control (AYC) is disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.