VOLVO
BCM-U042868 - Invalid Data Received From Steering Angle Sensor Module. Algorithm Based Failures. Event information
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
13 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (14)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Was bedeutet der Fehlercode?
The steering angle sensor control module (SAS) reports that its information is incorrect, and the brake control module (BCM) has received that signal. The code is set when the signal indicates a fault in the SAS information, and it can only be detected once the test has started. The fault lies in the steering angle sensor control module.
Mögliche Ursachen
- Fault in the steering angle sensor control module (SAS)
Was Sie tun können
- 1Read codes in the steering angle sensor module and troubleshoot them according to the system information
- 2Do not replace the brake control module for this code, as the fault lies in the steering angle sensor
- 3Clear the code only once the fault in the steering angle sensor has been corrected, and check that it does not return
- 4The brake and stability systems are safety-critical, so have a workshop carry out any work on the steering angle sensor and the brake control module
Symptome, die Sie bemerken können5
- Traction and anti-skid warning lamp lit
- Stability function does not work
- Traction control does not work
- Anti-skid function does not work
- Adaptive cruise control does not work
Was der Fehler beeinflussen kann1
- Dynamic stability control (AYC) is disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.