VOLVO
BCM-U045286 - Invalid Data Received From Restraints Control Module. Bus Signal / Message Failures. Signal invalid
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
6 ModelleS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), XC60 (2009–)
Was bedeutet der Fehlercode?
The brake control module (BCM) continuously receives information from the airbag system control module on the sensor CAN network and checks its quality. The code is set when the airbag system reports a lower quality level than the brake module accepts. Several stability and cruise control functions may then work poorly or not at all.
Mögliche Ursachen
- Fault in the airbag system, which sends information of too low quality
Was Sie tun können
- 1Read codes in the airbag system and troubleshoot them first, as the fault lies there
- 2This code can only be cleared once the root fault has been corrected and its own code has been cleared
- 3Check that the stability and cruise control functions work after the repair
- 4The airbag and brake systems are safety-critical, so do not work on them yourself and have a workshop carry out all work
Symptome, die Sie bemerken können5
- Traction control warning lamp lit
- Stability function does not work
- Traction control does not work
- Anti-skid function does not work
- Adaptive cruise control does not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.