VOLVO
BCM-U200746 - Valve(s). System Internal Failures. Calibration / parameter memory failure
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
13 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (14)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Was bedeutet der Fehlercode?
The brake control module (BCM) with its hydraulic unit is supplied calibrated from the factory. The code is set when the calibration for the analogue hydraulic valves is missing or when the calibration data does not match.
Mögliche Ursachen
- Calibration of the brake control module is missing
- Internal fault in the brake control module
- Damaged brake control module
Was Sie tun können
- 1Read codes in the central electronic module first, as the fault may lie there
- 2Have a workshop download the software again following the workshop procedure, then check that the code is not set again
- 3If the fault returns, have a workshop replace the brake control module and calibrate it
- 4The brake system is safety-critical, so have a workshop carry out all programming and any replacement
Symptome, die Sie bemerken können5
- ABS warning lamp lit
- General warning lamp on
- Stability function does not work
- Traction control does not work
- Anti-skid function does not work
Was der Fehler beeinflussen kann2
- Stability control and traction control are disabled
- Dynamic stability control (AYC) is disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.