VOLVO
BCM-U210000 - Control Module Not Configured. General Failure Information. No sub type information
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V60 (2011–)2011–2012
- Volvo V60 (2011–)2013–2014Alle Motoren außer: D82PHEV
- Volvo V60 (2011–)2015Alle Motoren außer: D82PHEV, D87PHEV
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Was bedeutet der Fehlercode?
The brake control module (BCM) has not been configured, because the CEM did not send it the vehicle data during the first ignition cycle. The code is set when the configuration information is missing, and it primarily points to a fault in the CEM.
Mögliche Ursachen
- Fault in the central electronic module (CEM), which is not sending configuration data
Was Sie tun können
- 1Read codes in the central electronic module and troubleshoot them first, as the fault most often lies there
- 2Do not replace the brake control module for this code, as it has no internal hardware fault
- 3Clear the code only once the fault in the central electronic module has been corrected, and check that it does not return
- 4The brake system is safety-critical, so have a workshop carry out any work on the central electronic module and the brake control module
Symptome, die Sie bemerken können5
- ABS warning lamp lit
- General warning lamp on
- Stability function does not work
- Traction control does not work
- Anti-skid function does not work
Was der Fehler beeinflussen kann2
- Stability control and traction control are disabled
- Dynamic stability control (AYC) is disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.