VOLVO
BCM-U300049 - Control Module. System Internal Failures. Internal electronic failure
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
12 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (14)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2015
- Volvo S80 (2007–)2015
- Volvo V40 (2013–)2015
- Volvo V40 Cross Country (2013–)2015
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2013–2014Nur Motor: D82PHEV
- Volvo V60 (2011–)2015
- Volvo V70 (2008–)2015
- Volvo XC60 (2009–)2015
- Volvo XC70 (2008–)2015
Was bedeutet der Fehlercode?
The BCM runs an internal self-check on its software. The code is set when that function has registered an internal fault, which may be a hardware fault or a software fault. The fault lies in the module and can affect several functions.
Mögliche Ursachen
- Internal fault in the brake control module
- Internal fault in the software
Was Sie tun können
- 1Check that the fuses for the brake system are intact; their locations are in the owner's manual or on the fuse box cover
- 2Read the codes and troubleshoot them according to the accompanying information with diagnostic equipment
- 3If the fault lies in the software, have a workshop download the latest software to the brake module
- 4If the fault remains, have a workshop replace the brake control module and calibrate its internal sensors
- 5The brake system is safety-critical, so have a workshop carry out any intervention in the brake control module
Symptome, die Sie bemerken können5
- Information lamp lit
- Traction control warning lamp lit
- Traction control does not work
- Stability function does not work
- Front monitoring and active safety do not work
Was der Fehler beeinflussen kann3
- Locking-free brakes and brake force distribution are disabled
- Traction control and stability control are disabled
- Dynamic stability control (AYC) is disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.