VOLVO
BCM-U300308 - Battery Voltage. General Failure Information. Bus Signal / Message Failures
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
6 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (7)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
Was bedeutet der Fehlercode?
Although the code is named battery voltage, it concerns the steering angle sensor signal. The brake control module (BCM) has received a steering angle signal over the data network (CAN) that is outside the plausible range, which points to a problem with the steering angle sensor or communication with it. This can affect the stability functions.
Mögliche Ursachen
- Break in the CAN bus
- Fault in the steering angle sensor module (SAS)
Was Sie tun können
- 1Read codes in the steering angle sensor module and troubleshoot them first
- 2Check the CAN wiring for breaks and contact resistance
- 3Do not replace the brake control module for this code, as the fault lies in another module
- 4The brake and stability systems are safety-critical, so have a workshop carry out any work on the wiring and the modules
Symptome, die Sie bemerken können1
- No clear symptoms for the driver
Was der Fehler beeinflussen kann3
- Stability control is disabled
- Traction control is disabled
- Dynamic stability control (AYC) is disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.