VOLVO
BCM-U300317 - Battery Voltage. General Electrical Failures. Circuit voltage above threshold
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
13 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (14)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Was bedeutet der Fehlercode?
The brake control module (BCM) measures the battery voltage and sets the code when it is too high. The fault normally lies in the charging system, and the electronic brake functions may be switched off for as long as the fault remains.
Mögliche Ursachen
- Fault in the charging system
Was Sie tun können
- 1First have a workshop check the central electronic module and the generator with diagnostic equipment
- 2Start the engine and let it idle; the voltage should be normal system voltage
- 3If the voltage is too high, have a workshop check the charging system and the battery
- 4The brake system is safety-critical, so have a workshop carry out any work on the charging system and the brake control module
Symptome, die Sie bemerken können5
- ABS warning lamp lit
- Brake circuit warning lamp lit
- Traction control warning lamp lit
- Stability function does not work
- Traction control does not work
Was der Fehler beeinflussen kann3
- Stability control is disabled
- Traction control is disabled
- Dynamic stability control (AYC) is disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.