VOLVO
BECM-C104216 - Hybrid/EV Battery Voltage Sense "B" Circiut Range/Performance. General Electrical Failures. Circuit voltage below threshold
System
Batteriesteuergerät (BECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellV60 (2011–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The battery energy control module (BECM) has registered too low a voltage in the battery cells of cell group B in the high-voltage battery. This can limit how much energy the battery can deliver, and electric drive may be unavailable. The fault is detected while the car runs on electric power or is charging, and it may be temporary or permanent.
Mögliche Ursachen
- Damage to the high-voltage battery
Was Sie tun können
- 1Read codes in the battery energy control module and other affected modules first, and troubleshoot any codes there
- 2Have a workshop with high-voltage qualification read the cell voltages and compare them between the modules
- 3Avoid charging until the fault has been investigated, and let the car cool if it has been hot
- 4High-voltage systems may only be handled by qualified personnel, so never work on the battery yourself
Symptome, die Sie bemerken können5
- Yellow warning symbol and message in the display
- Drive modes PURE, SAVE and AWD are switched off or unavailable
- The combustion engine runs more often than normal
- The battery is low or flat
- Charging warning lamp lit
Was der Fehler beeinflussen kann1
- Electric drive is not possible
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.