Was bedeutet der Fehlercode BECM-C107200?

Diagnose und Fehlercodedefinition für BECM-C107200 (Volvo V60 (2011–), Volvo V60 (2011–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

BECM-C107200 - Hybrid/EV Battery Pack Vehicle PSR Supply Voltage Low. General Failure Information. No sub type information

System

Batteriesteuergerät (BECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

1 Modell

V60 (2011–)

Modelle nach Baujahr und Motor anzeigen (2)

Was bedeutet der Fehlercode?

The high voltage battery gets wake-up commands over dedicated cables from the engine control module (ECM) via relays. The code is set when the PSR signal, which relates to operation, is too low for the battery energy control module (BECM). The fault may be caused by a fault in the central electronic module (CEM) or by poor connections.

Mögliche Ursachen

Fault-trace the central electronic module (CEM)
Poor contact or oxidation in the connectors

Was Sie tun können

1Read the fault codes in the central electronic module (CEM) and remedy any battery related faults first
2Have a workshop check that the connectors in the signal circuit are secure and free from corrosion
3Have a workshop check the PSR signal cable to the battery energy control module for an open circuit
4The high voltage system should only be handled by qualified personnel, so have a workshop carry out all work on the battery and other high voltage parts

Symptome, die Sie bemerken können4

Red warning symbol and message in the display
Drive modes PURE, SAVE and AWD disengage automatically or cannot be selected
The charging warning comes on or behaves abnormally
Low voltage in the battery or a dead battery

Was der Fehler beeinflussen kann1

Electric propulsion is not possible

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.