VOLVO
BECM-C107300 - Hybrid/EV Battery Current Above Threshold. General Failure Information. No sub type information
System
Batteriesteuergerät (BECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellV60 (2011–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The BECM measures the current in the high voltage circuits. The code is set when current stays above normal for an extended period. A fault in one of the other high voltage modules, or a short in the HV cabling, is most likely behind it.
Mögliche Ursachen
- Consequential fault: another control module found a fault on one of the high voltage circuits
- Short circuit in plugs between the battery and other HV components
- Short circuit in HV cabling running from the battery to other HV parts
Was Sie tun können
- 1Read the fault codes in the on-board charger, the DC/DC converter, the electric rear axle, the generator and the air conditioning compressor, and remedy them first
- 2If a blown fuse fault code is also stored, start the fault finding with that code
- 3Have a workshop check visible damage to the high voltage cable sheathing and connectors
- 4Have a workshop inspect the plugs and HV cabling between the battery and the other units
- 5The high voltage system should only be handled by qualified personnel, so have a workshop carry out all work on the battery and other high voltage parts
Symptome, die Sie bemerken können4
- Yellow warning symbol and message in the display
- Charging of the high voltage battery stops or works poorly, especially while driving
- The battery may be discharged or charge poorly
- Drive modes PURE, SAVE and AWD disengage automatically or cannot be selected
Was der Fehler beeinflussen kann2
- The high voltage battery cannot be charged
- Electric propulsion is not possible
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.