Was bedeutet der Fehlercode BECM-P0AA200?

Diagnose und Fehlercodedefinition für BECM-P0AA200 (Volvo V60 (2011–), Volvo V60 (2011–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

BECM-P0AA200 - Hybrid/EV Battery Positive Contactor Circuit Stuck Open. General Failure Information. No sub type information

System

Batteriesteuergerät (BECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

1 Modell

V60 (2011–)

Modelle nach Baujahr und Motor anzeigen (2)

Was bedeutet der Fehlercode?

The BECM controls and monitors the contactors of the high voltage battery at the same time. The code is set when no voltage is found in circuit A although the positive contact was commanded closed, which suggests it is stuck open. The fault may be caused by a damaged high voltage battery.

Mögliche Ursachen

The high voltage battery is damaged

Was Sie tun können

1Read and note the fault code, clear it and road test to check whether it returns
2Check that the car's ordinary battery is charged and in good condition
3Have a workshop with diagnostic equipment check the contactors and the high voltage battery
4The high voltage system should only be handled by qualified personnel, so have a workshop carry out all work on the battery and other high voltage parts

Symptome, die Sie bemerken können5

Red warning symbol and message in the display
Charging of the high voltage battery stops or works poorly
Drive modes PURE, SAVE and AWD disengage automatically or cannot be selected
The combustion engine may stop while driving
The combustion engine does not start

Was der Fehler beeinflussen kann3

The high voltage battery cannot be charged
Electric propulsion is not possible
Starting the combustion engine is not permitted

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.