Was bedeutet der Fehlercode BECM-P0D2600?

Diagnose und Fehlercodedefinition für BECM-P0D2600 (Volvo V60 (2011–), Volvo V60 (2011–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

BECM-P0D2600 - Battery Charger Hybrid/EV System Precharge Time Too Long. General Failure Information. No sub type information

System

Batteriesteuergerät (BECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

1 Modell

V60 (2011–)

Modelle nach Baujahr und Motor anzeigen (2)

Was bedeutet der Fehlercode?

Once the contactors close, voltage in the HV system should climb. The code is set when that climb in circuit B is too slow, which may be due to incorrect charging with an external cable, a fault in the on-board charger (OBC), or an open circuit in the high voltage cable.

Mögliche Ursachen

Incorrect charging from an external charging cable
The fault may lie in the on-board charger (OBC)
The high voltage cable in the circuit has an open circuit

Was Sie tun können

1Read and note the fault code, clear it and road test to check whether it returns
2Check that the charging cable is firmly connected at both the car and the outlet and that charging starts
3Have a workshop read the fault codes in the on-board charger (OBC) and remedy any faults found
4The high voltage system should only be handled by qualified personnel, so have a workshop carry out all work on the battery and other high voltage parts

Symptome, die Sie bemerken können4

Yellow warning symbol and message in the display
Charging from the external cable does not happen
The battery may be discharged or charge poorly
The charging warning comes on or behaves abnormally

Was der Fehler beeinflussen kann1

Charging from an external cable does not work

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.