VOLVO
BECM-U002855 - Vehicle Communication Bus A. System Programming Failures. Not configured
System
Batteriesteuergerät (BECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellV60 (2011–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
Its own configuration ID is checked against the one used on Sensor-CAN. The code is set when the ID does not match, which can happen if a control module has been replaced without the correct software being loaded.
Mögliche Ursachen
- Incorrect configuration ID, for example a used control module not intended for this car
- Sporadic breaks on one of the CAN wires in the network
Was Sie tun können
- 1Read and note the fault code, clear it and road test to check whether it returns
- 2Have a workshop check the configuration ID and load the correct software into the control module
- 3The high voltage system should only be handled by qualified personnel, so have a workshop carry out all work on the battery and other high voltage parts
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Was der Fehler beeinflussen kann1
- The control module stops sending messages on Sensor-CAN
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.