Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    CCM-0046
    VOLVO

    CCM-0046 - Blower fan relay. Signal too low

    System

    Klimaanlage (CCM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    2 Modelle

    S40 (1996–2004), V40 (1996–2004)

    Modelle nach Baujahr und Motor anzeigen (2)
    • Volvo S40 (1996–2004)2001–2004
    • Volvo V40 (1996–2004)2001–2004

    Was bedeutet der Fehlercode?

    The control module sees a low level on the relay line for maximum fan speed for a long time, even though the control module has not switched the relay on. The fault is usually poor contact, an open circuit or a short to ground in the wiring to the relay, or a defective relay for the air conditioning or for maximum speed.

    Mögliche Ursachen

    • Contact resistance or oxidation at the connections
    • Open circuit or short to ground in the wire between the fuse box and the blower fan relay
    • Open circuit or short to ground in the wire from the blower fan relay to the climate control module
    • Open circuit in the power supply to the air conditioning system relay
    • Defective air conditioning system relay
    • Defective blower fan relay for maximum speed

    Was Sie tun können

    1. 1With the ignition on, check that the fan speed can be set with the selector on the climate panel, and check the maximum setting too
    2. 2If the fan works now, the fault is probably intermittent. Check the connectors at the air conditioning relay and the blower relay for contact resistance and oxidation
    3. 3With a multimeter, check that the supply wires to the relays have voltage with the ignition on, and that the ground wires are connected to the body
    4. 4Remedy anything found. If the wiring and connections are in order, have a workshop replace the blower fan relay
    5. 5After the repair, check that the maximum speed works
    6. 6If you have a diagnostic tool, activate the relay from the activation function and check that the fan or heating starts

    Symptome, die Sie bemerken können2

    • The blower fan runs at just one setting
    • The blower fan does not work in the maximum speed setting

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.