VOLVO
CCM-0083 - Damper motor temperature right, bounces when reaching limit position
System
Klimaanlage (CCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (4)
Was bedeutet der Fehlercode?
The climate control module (CCM) communicates with the damper motor module (DMM) for the right-hand temperature damper over the LIN bus. The damper should move to the position the control module requests. When it bounces at its end stop and does not reach the correct position, the control module registers an internal fault in the module. The fault may be permanent, or it may have occurred earlier and not be active now.
Mögliche Ursachen
- Fault inside the right-hand temperature damper motor module (DMM)
Was Sie tun können
- 1Read off and clear the fault code, then drive the car for a while with the temperature control moved between cold and hot to see whether the code returns
- 2Check that the connector to the damper motor is fully engaged and free from oxidation and moisture
- 3Check the wiring to the damper motor for chafing and damaged insulation, especially where it runs close to moving parts
- 4With diagnostic equipment, follow the right-hand temperature damper position value in live data while the temperature is changed from cold to hot. It should stop at the end position, not jump
- 5If the fault remains after these checks, have a workshop replace the damper motor module (DMM) for right-hand temperature
Symptome, die Sie bemerken können1
- Temperature control works less well and the temperature in the cabin becomes uneven
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.