VOLVO
CCM-B105A71 - Cabin Temperature Sensor Fan. Mechanical Failures. Actuator stuck
System
Klimaanlage (CCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (4)
Was bedeutet der Fehlercode?
The fan blowing air over the cabin temperature sensor is stationary, and the climate control module (CCM) registers that the fan blades are stationary. The sensor then does not get the air it needs to measure correctly, so cabin temperature may differ from the setting.
Mögliche Ursachen
- Blower fan for the cabin temperature sensor is blocked
- The fan is not working
Was Sie tun können
- 1Check that the fuses for the climate system are intact
- 2Listen for whether the fan runs while the climate system is on
- 3Check whether anything blocks the fan, such as debris or a lodged object
- 4Read and clear the code, then road test the car to see whether it returns
- 5If the fault remains after the blockage is gone, have a workshop replace the fan
Symptome, die Sie bemerken können1
- Cabin temperature does not match the setting
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.