Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    CEM-1A5B
    VOLVO

    CEM-1A5B - Communication with the steering wheel module (SWM). Signal missing

    System

    Zentralelektronik (CEM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    5 Modelle

    S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Modelle nach Baujahr und Motor anzeigen (5)
    • Volvo S60 (2001–2009)2001–2004
    • Volvo S80 (1999–2006)1999–2004
    • Volvo V70 (2000–2008)2000–2004
    • Volvo V70 XC / XC70 (2001–2007)2001–2004
    • Volvo XC90 (2003–)2003–2004

    Was bedeutet der Fehlercode?

    The central electronic module (CEM) has lost communication with the steering wheel module (SWM) and sets this code. The fault lies in the communication, not in the CEM, so the CEM should not be replaced. The steering wheel module handles the buttons on the wheel and the cruise control, so several functions operated from the wheel can stop working.

    Mögliche Ursachen

    • The steering wheel module is not getting power
    • The ground wire to the steering wheel module is broken
    • Contact resistance in the connections
    • Broken CAN wiring to the steering wheel module
    • Wrong steering wheel module for this car, for example a used module with different software or hardware
    • A common CAN network fault if several communication faults are stored at the same time

    Was Sie tun können

    1. 1With the ignition on, activate the hazard warning switch. If the hazard lamps start, the CEM has power and ground
    2. 2Test the horn. If it sounds, the steering wheel module is probably powered. If the hazard lamps work but the horn does not, check the horn relay fuse in the engine bay.
    3. 3Check the steering wheel module fuse. If it has blown, replace it once. If it blows again, use a multimeter to check the wire after it has no contact with ground.
    4. 4Check that the connector to the steering wheel module is seated and not corroded or damaged. Use a multimeter to check the ground wire has no break
    5. 5After the work, clear the code and check the horn and the wheel buttons. If the code returns, read the module ID with a diagnostic tool if you have one

    Symptome, die Sie bemerken können4

    • Cruise control does not work at all
    • The wipers only run at the lowest speed
    • The turn signals do not work
    • The buttons on the steering wheel do not work

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.