Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    CEM-1B03
    VOLVO

    CEM-1B03 - Main Battery Diode Or Relay, General electrical failure

    System

    Zentralelektronik (CEM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    5 Modelle

    C30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Modelle nach Baujahr und Motor anzeigen (5)
    • Volvo C30 (2007–2013)2011–2013
    • Volvo C30 Electric (2011–2013)2011–2013
    • Volvo C70 (2006–2013)2011–2013
    • Volvo S40 (2004–2013)2011–2012
    • Volvo V50 (2004–2013)2011–2012

    Was bedeutet der Fehlercode?

    The fault concerns the main battery diode, the main battery relay or the secondary battery relay in cars with automatic start/stop. The code is also set when the CEM receives too little supply voltage, if the deviation lasts a short while during a restart after an auto stop. Several parts are involved, so tracing it may take some time.

    Mögliche Ursachen

    • The main battery relay is stuck in the closed position
    • The secondary battery relay is stuck in the open position
    • A damaged main battery diode
    • A damaged secondary battery relay
    • A blown fuse for the secondary battery
    • A broken wire to the secondary battery

    Was Sie tun können

    1. 1Check that the fuses are intact, especially the fuse for the secondary battery. The instruction book or fuse list shows their locations
    2. 2Check that the battery is charged and that the terminals and connections are seated and clean
    3. 3Use a multimeter to check that the wire to the secondary battery has no break
    4. 4If you have a diagnostic tool, read the fault codes after a drive with auto stop and see whether they return
    5. 5After the work, clear the code and drive for a while to see whether auto stop works again

    Symptome, die Sie bemerken können2

    • Auto start/stop does not work while driving
    • Auto start/stop does not work at idle

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.