VOLVO
CEM-1D06 - Control module. Configuration fault
System
Zentralelektronik (CEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (5)
Was bedeutet der Fehlercode?
The CEM has found the wrong parameter count in the car's configuration file. The fault is registered when the CEM starts up again after a reset. The fix is to reprogram the control module with the correct software, which a workshop does.
Mögliche Ursachen
- A wrong parameter count in the car's configuration file
Was Sie tun können
- 1Check that the battery terminals and cable connections are clean and tight, so the voltage does not drop at start-up
- 2With the ignition on, check whether the code returns after switching the ignition off and on again
- 3If you have a diagnostic tool, read the customer parameters and write them down before any software is downloaded
- 4Programming and new software are done by a workshop, since the control module must be reprogrammed
- 5After the work, clear the code and check that it does not return
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.