Was bedeutet der Fehlercode CEM-3F41?

Diagnose und Fehlercodedefinition für CEM-3F41 (Volvo C30 (2007–2013), Volvo C30 Electric (2011–2013), Volvo C70 (2006–2013)). Steuergerätereparatur bei OBD Tuning.

VOLVO

CEM-3F41 - Supply pedal sensor. Signal too low

System

Zentralelektronik (CEM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

5 Modelle

C30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

Modelle nach Baujahr und Motor anzeigen (5)

Was bedeutet der Fehlercode?

This variant applies to the C30, C30 Electric, C70, S40 and V50. The CEM supplies the clutch and accelerator pedal sensors. If the output gives too low a signal, the code is set. Cruise control is switched off and does not work at all.

Mögliche Ursachen

The signal cable is shorted to ground

Was Sie tun können

1With the ignition on, check that cruise control does not work. Check that the connectors at the clutch and accelerator pedal sensors are seated
2Use a multimeter to check that the signal wires to the pedal sensors are not shorted to ground
3Look for chafed or pinched cables at the pedals and free any that are being pinched
4After the work, clear the code and check that cruise control works

Symptome, die Sie bemerken können1

Cruise control does not work at all

Was der Fehler beeinflussen kann1

Cruise control is switched off

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.