Was bedeutet der Fehlercode CEM-3F83?

Diagnose und Fehlercodedefinition für CEM-3F83 (Volvo S60 (2001–2009), Volvo S80 (1999–2006), Volvo V70 (2000–2008)). Steuergerätereparatur bei OBD Tuning.

VOLVO

CEM-3F83 - Immobilizer signal. Signal too low

System

Zentralelektronik (CEM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

5 Modelle

S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

Modelle nach Baujahr und Motor anzeigen (5)

Was bedeutet der Fehlercode?

The CEM receives a signal from the gearbox that park or neutral is engaged, and compares it with the gear position from the TCM over the CAN network. If they do not match, the code is set. The gear position lock may then not work.

Mögliche Ursachen

The cable from the gear position sensor is shorted to ground

Was Sie tun können

1With the ignition off, check that the connectors at the gear position sensor and the CEM are seated and not corroded
2Use a multimeter to check that the cable from the gear position sensor is not shorted to ground
3With a diagnostic tool, follow the gear position sensor position in live data while you move the gear selector through the positions
4After the work, clear the code and check that the gear position lock works

Symptome, die Sie bemerken können1

The gear position lock does not work

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.