Was bedeutet der Fehlercode CEM-3F92?

Diagnose und Fehlercodedefinition für CEM-3F92 (Volvo C30 (2007–2013), Volvo C30 Electric (2011–2013), Volvo C70 (2006–2013)). Steuergerätereparatur bei OBD Tuning.

VOLVO

CEM-3F92 - Accelerator pedal (AP) position sensor. Signal too high

System

Zentralelektronik (CEM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

5 Modelle

C30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

Modelle nach Baujahr und Motor anzeigen (5)

Was bedeutet der Fehlercode?

This variant applies to the C30, C30 Electric, C70, S40 and V50. The CEM monitors the accelerator pedal sensor signal. If the signal is too high or missing, the code is set. The engine may feel sluggish and the accelerator pedal may not respond.

Mögliche Ursachen

The signal cable is shorted to supply voltage
An open circuit in the signal cable
A damaged accelerator pedal sensor

Was Sie tun können

1With a diagnostic tool, follow the accelerator pedal sensor signal in live data while you slowly press and release the pedal. The value should change evenly
2Check that the connector at the accelerator pedal sensor is seated and not corroded or chafed
3Use a multimeter to check that the signal wire from the sensor has no short to supply voltage or break
4If the wire is intact and the fault remains, replace the accelerator pedal sensor with an identical one
5After the work, clear the code and road-test the car

Symptome, die Sie bemerken können2

The engine feels sluggish
The accelerator pedal does not respond

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.