Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    CEM-4A37
    VOLVO

    CEM-4A37 - Fuel level sensor. Short-circuit to supply voltage or open-circuit

    System

    Zentralelektronik (CEM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    5 Modelle

    S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Modelle nach Baujahr und Motor anzeigen (5)
    • Volvo S60 (2001–2009)2005–2009
    • Volvo S80 (1999–2006)2005–2006
    • Volvo V70 (2000–2008)2005–2008
    • Volvo V70 XC / XC70 (2001–2007)2005–2007
    • Volvo XC90 (2003–)2005–2015

    Was bedeutet der Fehlercode?

    The CEM keeps watching the pump side sensor in the tank. The fault is set if the connection to the sensor has a break, or if the sensor is shorted to supply voltage. The fuel level is then set to zero.

    Mögliche Ursachen

    • An open circuit in the wire to the pump side sensor
    • The sensor on the pump side is shorted to supply voltage

    Was Sie tun können

    1. 1With the ignition off, unplug CEM connector D. Check that the connectors are seated and not corroded
    2. 2Use a multimeter to check that the signal wire to the sensor has no break or short to supply voltage
    3. 3If code CEM-4A33 is also stored, use a multimeter to check that the ground wire has no break
    4. 4If the wires are intact, have a workshop replace the sensor, since it sits in the tank
    5. 5After the work, clear the code and check that the fuel gauge shows the correct level

    Symptome, die Sie bemerken können2

    • The trip computer shows an empty tank too early
    • The fuel gauge reads zero although the tank holds fuel

    Was der Fehler beeinflussen kann1

    • The fuel level is set to zero

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.