VOLVO
CEM-6C3A - Glass break wire. Signal too high
System
Zentralelektronik (CEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleC30 (2007–2013), C30 Electric (2011–2013)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The CEM checks the glass breakage loop by measuring its voltage whenever the alarm is switched on. The loop should normally be connected to ground. The fault code is set when the voltage is not ground, which means the loop has a break.
Mögliche Ursachen
- Open circuit in the glass breakage loop
- Cable short to voltage supply
Was Sie tun können
- 1Clear the code and activate the alarm to see whether the fault code returns
- 2Use a multimeter to check that the wire has no break and no contact with voltage
- 3Check the intermediate connectors for loose connections and corrosion
- 4Disconnect the connector at the tailgate and check the glass breakage loop for a break
- 5Remedy what is found and check that the alarm works again
Symptome, die Sie bemerken können4
- Alarm does not respond to the sensor
- Message in the display
- Alarm or other alarm problems
- Warning symbol and text message
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.