Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    CEM-6C44
    VOLVO

    CEM-6C44 - Antenna/light ring wire data communication (IDS). Signal too low. Intermittent fault

    System

    Zentralelektronik (CEM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.

    Gilt für folgende Modelle:

    5 Modelle

    S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Modelle nach Baujahr und Motor anzeigen (5)
    • Volvo S60 (2001–2009)2001–2004
    • Volvo S80 (1999–2006)1999–2004
    • Volvo V70 (2000–2008)2000–2004
    • Volvo V70 XC / XC70 (2001–2007)2001–2004
    • Volvo XC90 (2003–)2003–2004

    Was bedeutet der Fehlercode?

    The data communication wire between the CEM and the antenna unit around the ignition switch gives too low a signal. The cause may be a break in the +15 supply to the ignition switch, a break in the data communication or an earth fault. The fault is intermittent, so it may have occurred earlier without being active now.

    Mögliche Ursachen

    • Open circuit in the +15 supply
    • Open circuit in the data communication wire
    • Earth fault in the data communication wire

    Was Sie tun können

    1. 1With the ignition off, check the earth lead of the antenna unit for loose connections and corrosion
    2. 2With the ignition on, check that the supply to the ignition switch is present, for example by checking the fuse
    3. 3Check the signal wire for chafing and loose connections, and check the connectors at the CEM and the antenna unit for corrosion
    4. 4Use a multimeter to check that the data communication wire has no break and no contact with ground (the body), testing one wire at a time
    5. 5If the fault returns and the wires are intact, a workshop should investigate the antenna unit

    Symptome, die Sie bemerken können2

    • Engine will not start
    • Starter motor does not work

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.