VOLVO
CEM-8A09 - Low beam right. Faulty signal
System
Zentralelektronik (CEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (5)
Was bedeutet der Fehlercode?
CEM supplies the right low beam directly through an output. If CEM registers too low a current draw at the output, the fault code is set. This can be caused by a faulty or missing low beam lamp, a break in the signal wire or a short to voltage, and it shows when the low beam is on.
Mögliche Ursachen
- Low beam lamp faulty or missing
- Break in the signal wire to the right low beam lamp
- Signal wire short-circuited to voltage
Was Sie tun können
- 1Switch on the ignition, activate the low beam and check whether the right lamp lights
- 2If the lamp does not light, check that it is seated and intact
- 3Use a multimeter to check that the signal wire to the lamp has no break and no contact with voltage
- 4Remedy what is found and check that the low beam lights when activated
Symptome, die Sie bemerken können2
- Low beam does not work
- The low beam is lit all the time
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.