Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    CEM-8A38
    VOLVO

    CEM-8A38 - Gas discharge lamp module (GDL) right-hand. Faulty signal

    System

    Zentralelektronik (CEM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    4 Modelle

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Modelle nach Baujahr und Motor anzeigen (4)
    • Volvo C30 (2007–2013)2007–2011
    • Volvo C70 (2006–2013)2006–2011
    • Volvo S40 (2004–2013)2004–2007
    • Volvo V50 (2004–2013)2004–2007

    Was bedeutet der Fehlercode?

    The right-hand gas discharge lamp module (GDL) reports a fault in the signal from the actuator motor in the right headlamp. The code points to an open circuit or a short circuit in the signal wire. The high beam does not work, and only the low beam remains.

    Mögliche Ursachen

    • Open circuit in the signal wire to the right-hand actuator motor
    • The signal wire to the right-hand actuator motor is short-circuited to battery voltage
    • The signal wire to the right-hand actuator motor is short-circuited to ground

    Was Sie tun können

    1. 1Activate the high beam with the ignition on. If it stays dark the fault is likely permanent; if it lights but the code was stored earlier, it is intermittent
    2. 2Switch the ignition off and check that the connectors at the right headlamp are clean, firmly fitted and undamaged
    3. 3Use a multimeter to check that the signal wire between the right headlamp and the module is not broken and has no contact with ground or voltage
    4. 4If the fault remains, have a workshop replace the right lamp housing and check the signal wires

    Symptome, die Sie bemerken können1

    • The high beam does not work

    Was der Fehler beeinflussen kann1

    • Only the low beam works

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.