Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    CEM-8F16
    VOLVO

    CEM-8F16 - Xenon lamp left. Signal too low

    System

    Zentralelektronik (CEM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    5 Modelle

    S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Modelle nach Baujahr und Motor anzeigen (5)
    • Volvo S60 (2001–2009)2002–2009
    • Volvo S80 (1999–2006)2002–2006
    • Volvo V70 (2000–2008)2002–2008
    • Volvo V70 XC / XC70 (2001–2007)2002–2007
    • Volvo XC90 (2003–)2003–2015

    Was bedeutet der Fehlercode?

    The central electronic module (CEM) has registered that the signal from the left xenon lamp is too low. The fault is only checked with the ignition on and sufficient battery voltage, and it can come from a signal wire shorted to ground or from an actuator motor in the lamp housing that has jammed or been damaged.

    Mögliche Ursachen

    • Signal wire short-circuited to ground
    • The motor that moves the xenon lamp has seized
    • Faulty or broken motor that moves the xenon lamp

    Was Sie tun können

    1. 1Check the battery: it should be charged and the terminals tight, because the fault is only tested when the battery voltage is sufficient
    2. 2With the ignition on, switch between low and high beam: if the lamp does not change, the fault is permanent; if it changes, the fault has occurred before
    3. 3Use a multimeter to check that the signal wire to the left lamp has no contact with ground (the body) with the ignition off
    4. 4If you have a diagnostic tool, activate the actuator motor in the left headlamp and check that it moves
    5. 5If the fault remains after these checks, have a workshop replace the left headlamp housing

    Symptome, die Sie bemerken können4

    • The low beam is constantly lit
    • The high beam is constantly lit
    • Road surface lighting does not work
    • Headlamp aim is wrong or the height adjustment does not work

    Was der Fehler beeinflussen kann1

    • The shortest beam range is used

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.