VOLVO
CEM-B100715 - Gear Lever Illumination. General Electrical Failures. Circuit short to battery or open
System
Zentralelektronik (CEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleV40 (2013–), V40 Cross Country (2013–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The voltage feeding the gear selector lighting is excessive, or the circuit is broken. The fault code is stored when the central electronic module (CEM) detects this, and the gear lever lighting does not work.
Mögliche Ursachen
- Supply cable shorted to voltage
- Supply cable has an open circuit
Was Sie tun können
- 1Check that the relevant fuses are intact
- 2Switch the ignition off, wait a moment and switch it on again to see whether the lighting works
- 3With the ignition on, check the cable for chafing, wear and loose connections, especially where it might have touched a live wire
- 4With the ignition off, use a multimeter to check whether the supply cable has voltage or is broken
- 5Remedy the fault and clear the fault code. If it remains, have a workshop check the control module
Symptome, die Sie bemerken können1
- Gear selector lighting does not work
Was der Fehler beeinflussen kann1
- The output is switched off for the rest of the drive cycle and only starts again after an ignition cycle
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.