VOLVO
CEM-B102652 - Steering Column Lock. System Programming Failures. Not activated
System
Zentralelektronik (CEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Was bedeutet der Fehlercode?
The fault code shows that the steering column lock control unit reaches a different conclusion from the central electronic module (CEM) about whether the engine is off and the car is stationary when locking is requested. It points to an unwanted event rather than a fault in the car, but the lock cannot lock during the same drive cycle.
Mögliche Ursachen
- No real fault in the car. The code relates to an unwanted event that normally needs no action
- Internal fault in the steering column lock control unit (SCL)
Was Sie tun können
- 1The fault code normally needs no action on the car. Clear it and check whether it returns the next time the car is locked
- 2The steering lock is part of the steering. If it does not lock or unlock as it should, do not drive the car until a workshop has checked it
- 3Check whether there are other fault codes in the car, and deal with them first if there are
- 4If it returns, use a multimeter with the ignition off to check the steering lock wire for earth contact or a break, then have a workshop fix it
Symptome, die Sie bemerken können3
- The steering lock does not work
- Amber warning symbol and text message in the display
- The engine does not start, or starts only unreliably
Was der Fehler beeinflussen kann1
- The steering lock is not allowed to lock during the same drive cycle in which the fault was recorded
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.