VOLVO
CEM-B102921 - Accelerator Pedal Sensor. General Signal Failures. Signal too low
System
Zentralelektronik (CEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Was bedeutet der Fehlercode?
The central electronic module (CEM) monitors the voltage on the signal wire from the accelerator pedal position sensor. The fault code is stored when the signal is too low, which here is because the signal wire is shorted to earth or the sensor is damaged. The engine may then feel sluggish.
Mögliche Ursachen
- Signal wire shorted to earth
- Damaged accelerator pedal position sensor
Was Sie tun können
- 1Do not drive the car if the accelerator pedal does not respond. Stop somewhere safe and contact a workshop
- 2Check that the fuses for the engine control are intact
- 3With the ignition on, check the wires to the accelerator pedal sensor for chafing, pinching and loose connections
- 4With the ignition off, use a multimeter to check whether the signal wire has contact with earth (the body)
- 5Remedy the short circuit if it is found and clear the fault code. If the fault remains, have a workshop check or replace the accelerator pedal sensor
Symptome, die Sie bemerken können2
- The engine feels sluggish
- The accelerator pedal gives no response
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.