VOLVO
CEM-B104321 - Front Axle Sensor. General Signal Failures. Signal too low
System
Zentralelektronik (CEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
Was bedeutet der Fehlercode?
The central electronic module (CEM) monitors the signal from the front position sensor, which senses the headlamp setting. The fault code is stored when the signal is too low compared with the supply voltage. The headlamp side and height adjustment can then be affected.
Mögliche Ursachen
- Voltage supply shorted to earth
- Contact resistance, oxidation or loose connections in connectors or joints
- Signal wire to the front position sensor shorted to earth
- Break in the signal wire to the front position sensor
- Break in the supply wire to the position sensor
- Damaged sensor
Was Sie tun können
- 1Check that the connectors to the front position sensor are secure and free from corrosion
- 2With the ignition off, check the wires to the position sensor for chafing, pinching and breaks, and gently move them
- 3With the ignition off, use a multimeter to check whether the supply and signal wires to the position sensor have contact with earth (the body)
- 4Remedy the fault and clear the fault code. If it returns with intact wires, have a workshop check and, if needed, replace the position sensor
Symptome, die Sie bemerken können2
- The headlamp side adjustment is wrong or does not work
- The headlamp height adjustment is wrong or does not work
Was der Fehler beeinflussen kann2
- The light range is held constant
- Side adjustment freezes in the straight-ahead position
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.