Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    CEM-B106D11
    VOLVO

    CEM-B106D11 - Side Marker Light. General Electrical Failures. Circuit short to ground

    System

    Zentralelektronik (CEM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    7 Modelle

    S60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Modelle nach Baujahr und Motor anzeigen (7)
    • Volvo S60 (2011–)2014–2015
    • Volvo S80 (2007–)2014–2015
    • Volvo V60 (2011–)2014–2015
    • Volvo V60 Cross Country (2015–)2015
    • Volvo V70 (2008–)2014–2015
    • Volvo XC60 (2009–)2014–2015
    • Volvo XC70 (2008–)2014–2015

    Was bedeutet der Fehlercode?

    The central electronic module (CEM) supplies the side marker lights and monitors the current in the circuit. The fault shows that the circuit to the side marker lights is shorted to ground, so the lights do not work. The fault is checked when the side marker lights are switched on.

    Mögliche Ursachen

    • The circuit to the side marker lights is shorted to ground

    Was Sie tun können

    1. 1Read off and note the code, clear it and switch the side marker lights on to see whether the fault returns
    2. 2Check that the fuses for the side marker lights are intact
    3. 3Check that the lamp connectors are fully engaged and not corroded, and that the cable is not chafed
    4. 4Use a multimeter (ignition off, connector unplugged) to check that the wire to the side marker lights has no connection to ground (car body)
    5. 5If you have a diagnostic tool, activate the side marker lights with the tool and check that they come on
    6. 6If the fault remains, have a workshop check the wiring and the lights

    Symptome, die Sie bemerken können1

    • Side marker lights or position lights do not work

    Was der Fehler beeinflussen kann1

    • The side marker light output is switched off during the operating cycle in which the fault is detected

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.