VOLVO
CEM-B108A24 - Start Button. General Signal Failures. Signal stuck high
System
Zentralelektronik (CEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
Was bedeutet der Fehlercode?
The central electronic module (CEM) monitors the two switches in the start button, which show whether the button is pressed. The fault shows that both switches have been active for too long, which suggests the start button is stuck pressed or a switch is damaged. The fault is checked when the start button is pressed.
Mögliche Ursachen
- The start button has stuck in the pressed position
- The start button was held pressed for too long
- Damaged switch
- Internal fault in the ignition lock control module (SCU)
- Internal fault in the antenna unit for the start lock (IAU)
Was Sie tun können
- 1Check that the start button is not stuck in the pressed position and returns fully when released
- 2Remove the key from the ignition lock (if it is in) and check that the start button feels normal when pressed and released
- 3Check that the fuses are intact
- 4If you have a diagnostic tool, read the start button switches in live data and check that both change to on when the button is pressed and to off when released
- 5Use a multimeter (ignition off, connectors unplugged) to check that the signal wires to the start button are not shorted to ground or voltage
- 6If the fault remains, have a workshop check the start button and the ignition lock control module
Symptome, die Sie bemerken können4
- The engine does not start
- The engine cannot be switched off
- The steering lock does not work
- Warning symbol and text message in the display
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.