VOLVO
CEM-B108B24 - Start Button Circuit A. General Signal Failures. Signal stuck high
System
Zentralelektronik (CEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Was bedeutet der Fehlercode?
The central electronic module (CEM) monitors the two switches in the start button, where the second sends its signal over the LIN bus. The fault shows that the first switch stayed active over an extended period while the start button closes the second, which suggests the signal from the first switch is too high. The fault is checked when the start button is pressed.
Mögliche Ursachen
- The signal wire is shorted to ground
- Damaged switch
- Internal fault in the ignition lock control module (SCU)
Was Sie tun können
- 1Check that the start button is not stuck in position and returns fully when released
- 2Check that the fuses are intact
- 3Check that the connectors at the start button are fully engaged and that the cable is not pinched
- 4If you have a diagnostic tool, press the start button and check in live data that the first switch returns to off when the button is released
- 5Use a multimeter (ignition off, connector unplugged) to check that the signal wire has no connection to ground
- 6If the fault remains, have a workshop check the start button and the ignition lock control module
Symptome, die Sie bemerken können1
- The steering lock does not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.