VOLVO
CEM-B10A200 - Crash Input. General Failure Information. No sub type information
System
Zentralelektronik (CEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Was bedeutet der Fehlercode?
The control module monitors the collision input from the supplemental restraint system (SRS). The fault shows that the CEM has registered a collision signal, which can be caused by a collision having occurred or an airbag having deployed. The restraint system must be checked before the signal is reset.
Mögliche Ursachen
- A collision signal has been registered in the supplemental restraint system
Was Sie tun können
- 1Read off and note the code, but do not clear it until the restraint system has been checked
- 2Check whether the car has been in a collision or an airbag has deployed, as this explains why the signal was registered
- 3Do not work on the airbag system yourself: have a workshop check the restraint system and reset the collision signal
- 4Do not drive the car with a restraint system warning until a workshop has checked it
Symptome, die Sie bemerken können3
- The engine is difficult to start
- The malfunction indicator light is on
- Message in the information display
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.