VOLVO
CEM-B10A202 - Crash Input. General Failure Information. General signal failure
System
Zentralelektronik (CEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
Was bedeutet der Fehlercode?
The control module monitors the collision input from the supplemental restraint system (SRS). The fault shows that the signal differs from the expected value, which can be caused by a break in the signal wire, poor contact or an incorrect voltage supply to the restraint system.
Mögliche Ursachen
- Open circuit in the signal wire to the restraint system
- Contact resistance or oxidation in connections
- Incorrect voltage supply to the restraint system
Was Sie tun können
- 1Read off and note the code and check whether it returns when the ignition is switched on
- 2Check that the fuses are intact and that the battery is in good condition, as low or unstable voltage can cause the fault
- 3Do not work on the airbag system yourself, even if a connector looks loose: have a workshop check the wiring and the airbag control module
- 4Do not drive the car with a restraint system warning until a workshop has checked it
Symptome, die Sie bemerken können2
- Message in the display
- Yellow warning symbol and text message in the display
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.