VOLVO
CEM-B10A206 - Crash Input. General Failure Information. Algorithm Based Failures
System
Zentralelektronik (CEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Was bedeutet der Fehlercode?
The CEM monitors the collision input from the supplemental restraint system (SRS). The fault shows that both collision signals give incorrect values, which points to a problem with connectors, wiring or the voltage supply to the system.
Mögliche Ursachen
- Contact resistance or oxidation in connections
- Open circuit in the signal wire
- Incorrect voltage supply to the supplemental restraint system (SRS)
Was Sie tun können
- 1Read off and note the code, but do not clear it until the restraint system has been checked
- 2Check that the battery is in good condition and that the fuses are intact, since incorrect voltage can cause the fault
- 3Look for loose or corroded connectors on the wiring to the restraint system, but do not work on the wiring yourself
- 4Do not work on the airbag system yourself: have a workshop check the wiring and the restraint system control module
- 5Do not drive the car with a restraint system warning until a workshop has checked it
Symptome, die Sie bemerken können1
- Text message and warning symbol in the display
Was der Fehler beeinflussen kann1
- The last approved value is used instead of the current value
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.